Clear Bottle Filling Tube with Valve (and spring)

This filler is narrower than the standard blue or white filler so it DOES NOT fit directly inside the spout of our white barrel taps. It can be used with longer spout taps (using an adaptor of 9.5mm hose or the silicone 100mm adaptor).

Bottle fillers allow you to fill your brew into the bottle with a minimum of oxygen getting into the brew. It also allows you to control the fill level of each bottle easily with no spillage. Simply sterilise with your bottles. Push top end inside the tap spout. Turn the tap on full and allow filler to fill up with brew. Push each sterilised bottle up onto the bottle filler until the inside base of the bottle pushes up against the filler valve and opens it up. Just before the bottle overflows the top drop the bottle down to release the valve. Repeat with next bottle.

NB: We can supply a short length of tubing as a free adaptor with your filler if you are using a longer spouted tap. Please ask for this in the comments box. Or you can purchase a Silicone Adaptor 100mm for bottle filler.